Autel Support Communities
Autel Support Communities
Welcome, Guest     Sign in
Communities > Diagnostic & Analysis System > MaxiSys Elite > Autel MaxiSYS Elite Bettery Problem
Autel MaxiSYS Elite Bettery Problem

2432 Views 7 Replies Latest reply: 2019-09-10 16:45:10


  •   Level 1   
    (5) points
    AlexG
    2018-10-27 00:18:31

     Hi. I have Autel MaxiSYS Elite  for more then  3 year. .About 3 month ego I paid for update for 2 years and next week , my battery went bad . My distributor from china - 3 years it to long for support -He sad . and stop answering on my emails . I looking for  new or used but good battery  .I asked and  send  messages to all Battery company nothing . I  willing to pay as match  as the would  say but nothing .Now I use power from car battery ,but scanner shutting down so often 2-3 times per car .when I do diagnostic .
    Pleas  who can help me

    Thanks

    file:  Battery.jpg

  •   Level 2   
    (12) points
    JJMB

    2019-03-22 19:32:04 (Reply to:AlexG)

    Open machine up remove battery and have it re celled

  •   Level 4   
    (140) points
    bad007

    2019-03-31 18:38:58 (Reply to:AlexG)

     Replace the battery yourself. It's not worth trying to go through Autel 
    The same if you ever need a new touch screen.

  •   Level 9   
    (5837) points
    Ashraf

    2019-08-10 08:33:08 (Reply to:bad007)

     Can you guys any of if have any link for buying the Battery or, Screen can post it so it can be helpful to other members.................

  •   Level 10   
    (7578) points
    witsend

    2019-08-12 05:43:33 (Reply to:JJMB)

     I thought one of the features of the Maxi Sys Elite that set it apart from the MaxiSys Pro, was the battery was supposed to be more user friendly to remove and replace

  •   Level 2   
    (30) points
    Dan Fisk

    2019-08-12 21:46:44 (Reply to:witsend)

    It is very easy to replace. Remove small screws for center cover. Remove battery, disconnect connector. Reverse procedure to install.

  •   Level 10   
    (7578) points
    witsend

    2019-09-06 23:01:59 (Reply to:bad007)

     That youtube video link is for the battery replacement on a older MS908 or MS908Pro, not the  Elite

  •   Level 10   
    (7578) points
    witsend

    2019-09-10 16:45:10 (Reply to:JJMB)

     If there is a place that re-cells it , I imagine they would need to completely deplete the battery module charge before using a hot razor knife along the seam, then  carefully split the sealed battery module shell that they need to reuse, then once separated and unstuck from each other or shell with a  heat gun they probably replace the 4 separate 3850 mah batteries (with different manufacturer part #s readily found on the internet) that are soldered and wired in parallel inside that plastic Autel  battery module shell.
1
  Total1 Pages